Mumbai, Maharashtra
GST No. 27CFYPS7164C1ZQ
Call 08047651916 92% Response Rate
Product Brochure
Thickness | 0.5 MM TO 100 MM |
Material | Stainless Steel |
Usage/Application | Industry |
Model Name/Number | 600 N06600 |
Surface Finishing | Polished |
Country of Origin | Made in India |
View Complete details
Minimum Order Quantity: 5 Kg
Product Brochure
Grade | 600 (N06600), 601 (N06601), 625 (N06625), 718 (N07718), 800 (N08800), 800H, 800HT, 825 (N08825) |
Thickness | 0.5 MM TO 100 MM |
Material | Inconel |
Country of Origin | Made in India |
Shape | Sheet, Plate, Coil, Flat, Strip, Circle, Profile, Shim, Foil |
Brand | Nufit |
ASTM STANDARD | ASTM B168, B443, B409, B424, B625 |
Additional Information:
View Complete details
Minimum Order Quantity: 50 Kg
Product Brochure
Material | Inconel Alloy |
Shape | Round |
Material Grade | 600 |
Usage/Application | Construction |
Type | Bar |
Technique | Hot Rolled |
View Complete details
Minimum Order Quantity: 10 Kg
Product Brochure
Material | Inconel |
Grade | 625 |
Shape | Round |
Size/Diameter | 3 inch |
Usage/Application | Pipe Fittings |
Type | Seamless |
View Complete details
Minimum Order Quantity: 10 Kg
Product Brochure
Material Grade | ASTM B408 - 800 (N08800), 800H (N08810), 800HT N08811, B425 - 825 (N08825), 925 (N08925), 926 N08926 |
Country of Origin | Made in India |
Test Certificate | Available |
Brand | NUFIT, Sandvik, Valbruna, Special Metals, BGH |
Shape | Round |
Material | ASTM B166 - 600 (N06600), 601 (N06601), 625 (N06625), 718 |
Third Party Inspection (TPI) | Acceptable |
Size | DIA 3 mm to 406 mm |
Diameter | DIA 3 mm to 406 mm |
Usage/Application | Industrial |
Single Piece Length | 6 meter |
Type | Bar |
Technique | Cold Rolled, Hot Rolled |
Place Of Origin | India, Europe, USA, Japan, China |
ASTM B166 | 600 (N06600), 601 (N06601), 625 (N06625), 718 |
ASTM B408 | 800 (N08800), 800H (N08810), 800HT N08811) |
ASTM B425 | 825 (N08825), 925 (N08925), 926 (N08926) |
FORMS | Round Bar, Hex Bar, Square Bar, Flat Bar, Wire, Rod |
Finish | Black, Bright |
Nufit Piping Solutions maintains a large inventory of Inconel Alloy Round Bar, Hex Bar, Square Bar & Flat Bar. Inconel alloys are oxidation-corrosion-resistant materials well suited for service in extreme environments subjected to pressure and heat. When heated, Inconel forms a thick, stable, passivating oxide layer protecting the surface from further attack. Inconel retains strength over a wide temperature range, attractive for high-temperature applications where aluminium and steel would succumb to creep as a result of thermally-induced crystal vacancies. Inconel's high-temperature strength is developed by solid solution strengthening or precipitation hardening, depending on the alloy.
Inconel alloys are typically used in high temperature applications. Common trade names for
· Inconel Alloy 625 include: Inconel 625, Chronin 625, Altemp 625, Haynes 625, Nickelvac 625 Nicrofer 6020 and UNS designation N06625
· Inconel Alloy 600 include: NA14, BS3076, 2.4816, NiCr15Fe (FR), NiCr15Fe (EU), NiCr15Fe8 (DE) and UNS designation N06600
· Inconel 718 include: Nicrofer 5219, Superimphy 718, Haynes 718, Pyromet 718, Supermet 718, Udimet 718 and UNS designation N07718
Inconel Grades: 600, 601, 617, 625, 718, 800, 825, X750, 925
Size: Dia 3 mm to 406 mm
Additional Information:
View Complete details
Minimum Order Quantity: 10 Kg
Product Brochure
Size | DIA 3 mm to 406 mm |
Type | Bar |
Third Party Inspection (TPI) | Acceptable |
Single Piece Length | 6 meter |
Diameter | DIA 3 mm to 406 mm |
Test Certificate | Available |
Place Of Origin | India, Europe, USA, Japan, China |
Material | ASTM B166 - 600 (N06600), 601 (N06601), 625 (N06625), 718 |
Standard | ASTM B166, ASTM B408, ASTM B425, ASTM B564 |
Technique | Cold Rolled, Hot Rolled |
Country of Origin | Made in India |
Brand | NUFIT, Sandvik, Valbruna, Special Metals, BGH |
Usage/Application | Industrial |
Material Grade | ASTM B408 - 800 (N08800), 800H (N08810), 800HT N08811, B425 - 825 (N08825), 925 (N08925), 926 N08926 |
Shape | Round |
ASTM B166 | 600 (N06600), 601 (N06601), 625 (N06625), 718 |
ASTM B408 | 800 (N08800), 800H (N08810), 800HT (N08811) |
ASTM B425 | 825 (N08825), 925 (N08925), 926 (N08926) |
FORMS | Round Bar, Hex Bar, Square Bar, Flat Bar, Wire, Rod |
Finish | Black, Bright |
Nufit Piping Solutions maintains a large inventory of Inconel Alloy Round Bar, Hex Bar, Square Bar & Flat Bar. Inconel alloys are oxidation-corrosion-resistant materials well suited for service in extreme environments subjected to pressure and heat. When heated, Inconel forms a thick, stable, passivating oxide layer protecting the surface from further attack. Inconel retains strength over a wide temperature range, attractive for high-temperature applications where aluminium and steel would succumb to creep as a result of thermally-induced crystal vacancies. Inconel's high-temperature strength is developed by solid solution strengthening or precipitation hardening, depending on the alloy.
Inconel alloys are typically used in high temperature applications. Common trade names for
· Inconel Alloy 625 include: Inconel 625, Chronin 625, Altemp 625, Haynes 625, Nickelvac 625 Nicrofer 6020 and UNS designation N06625
· Inconel Alloy 600 include: NA14, BS3076, 2.4816, NiCr15Fe (FR), NiCr15Fe (EU), NiCr15Fe8 (DE) and UNS designation N06600
· Inconel 718 include: Nicrofer 5219, Superimphy 718, Haynes 718, Pyromet 718, Supermet 718, Udimet 718 and UNS designation N07718
Inconel Grades: 600, 601, 617, 625, 718, 800, 825, X750, 925
Size: Dia 3 mm to 406 mm
Additional Information:
View Complete details
Minimum Order Quantity: 10 Kg
Product Brochure
Shape | Round |
Place Of Origin | India, Europe, USA, Japan, China |
Standard | ASTM B166, ASTM B408, ASTM B425, ASTM B564 |
Diameter | DIA 3 mm to 406 mm |
Type | Bar |
Single Piece Length | 6 meter |
Third Party Inspection (TPI) | Acceptable |
Size | DIA 3 mm to 406 mm |
Country of Origin | Made in India |
Usage/Application | Industrial |
Test Certificate | Available |
Material Grade | ASTM B408 - 800 (N08800), 800H (N08810), 800HT N08811, B425 - 825 (N08825), 925 (N08925), 926 N08926 |
Brand | NUFIT, Sandvik, Valbruna, Special Metals, BGH |
Technique | Cold Rolled, Hot Rolled |
Material | ASTM B166 - 600 (N06600), 601 (N06601), 625 (N06625), 718 |
ASTM B166 | 600 (N06600), 601 (N06601), 625 (N06625), 718 |
ASTM B408 | 800 (N08800), 800H (N08810), 800HT (N08811) |
ASTM B425 | 825 (N08825), 925 (N08925), 926 (N08926) |
FORMS | Round Bar, Hex Bar, Square Bar, Flat Bar, Wire, Rod |
Finish | Black, Bright |
Nufit Piping Solutions maintains a large inventory of Inconel Alloy Round Bar, Hex Bar, Square Bar & Flat Bar. Inconel alloys are oxidation-corrosion-resistant materials well suited for service in extreme environments subjected to pressure and heat. When heated, Inconel forms a thick, stable, passivating oxide layer protecting the surface from further attack. Inconel retains strength over a wide temperature range, attractive for high-temperature applications where aluminium and steel would succumb to creep as a result of thermally-induced crystal vacancies. Inconel's high-temperature strength is developed by solid solution strengthening or precipitation hardening, depending on the alloy.
Inconel alloys are typically used in high temperature applications. Common trade names for
· Inconel Alloy 625 include: Inconel 625, Chronin 625, Altemp 625, Haynes 625, Nickelvac 625 Nicrofer 6020 and UNS designation N06625
· Inconel Alloy 600 include: NA14, BS3076, 2.4816, NiCr15Fe (FR), NiCr15Fe (EU), NiCr15Fe8 (DE) and UNS designation N06600
· Inconel 718 include: Nicrofer 5219, Superimphy 718, Haynes 718, Pyromet 718, Supermet 718, Udimet 718 and UNS designation N07718
Inconel Grades: 600, 601, 617, 625, 718, 800, 825, X750, 925
Size: Dia 3 mm to 406 mm
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Country of Origin | Made in India |
Iso Certified | Yes |
Rated Pressure | ANSI B16.5 (150# to 2500#), DIN EN 1092-1 (PN 2.5 to PN 400), JIS B2220 (5K to 30K) |
Size | 1/2" to 24" |
I Deal In | New Only |
Usage/Application | Industrial |
Product Type | Slip On (SO), Blind (BL), Lap Joint (LF) Socketweld (SW), Weld Neck (WN), Long Weld Neck (LWN Flange |
Grade | ASTM B564 - 600 (N06600), 601 (N06601), 625 (N06625), 718, 800 (N08800), 800H (N08810), 825 (N08825) |
Material Standard | ASTM B564, ASME SB564 |
Dimension Standard | ASME |
ASME B16.5 | Class 150#, 300#, 600#, 900#, 1500#, 2500# LBS |
API 6A | 13.8 MPa, 2K, 20.7 MPa, 3K, 34.5 MPa, 5K, 69 MPa, 10K, 103.5 MPa, 15K, 138 MPa, 20K |
DIN EN 1092-1 | PN 2.5, PN 6, PN10, PN16, PN25, PN40, PN60, PN100, PN160, PN250, PN320, PN400 |
JIS B2220 | 5K, 10K, 16K, 20K, 30K |
BRAND | NUFIT |
Flange Face | Flat Face FF, Raised Face RF, Ring Type Joint RTJ, Male/Female MF, Tongue & Groove TG |
We, Nufit Piping Solutions, are An ISO Certified Leading Manufacturer, Exporter & Supplier of Flanges in India. Nufit Piping Solutions is specialized manufacturer of all type of Flanges available in various grades, size & pressure rating.
Grade:
Stainless Steel: ASTM A182 - F201, F202, F301, F302, F304, F304L, F309, F310, F316, F316L, F316LN, F317L, F321, F347, 405, 409, 410, 420, 430, 440C, F904L.
Carbon Steel: SS 400, ASTM A105, ASTM A350 Gr. LF2, LF3, ASTM A694 - F42, F46, F48, F50, F52, F56, F60, F65, F70.
Alloy Steel: ASTM A182 - F11, F12, F22, F5, F9, F91.
Duplex Steel: ASTM A182 - 2205 (F51, S31803 / F60, S32205), SMO254 (F44, S31254), 2507 (F53, S32750), F55 (S32760), Ferralium 255 (F61, S32550).
Nickel Alloy: ASTM B564 - 200 (N02200), 201 (N02201), ASTM A182 - Alloy 20 (F20, N08020).
Inconel: ASTM B564 - 600 (N06600), 601 (N06601), 625 (N06625), 718, 800 (N08800), 800H (N08810), 800HT N08811), 825 (N08825), ASTM A182 - F904L (N08904).
Monel: ASTM B564 - 400 (N04400), 500 (N05500).
Hastelloy: ASTM B564 - C276 (N10276), C4 (N06455), C22 (N06022), C2000 (N06200), X (N06002),
B2 (N10665), B3 (N10675).
Titanium: ASTM B381 - F2, F5 (Ti6Al4V), F7.
Copper Alloy: Commercial, ETP, OFE, CuNi 90/10 (C70600), CuNi 70/30 (C71500), Brass, Naval Brass,
Nickel Aluminium Bronze C95800, C63000, Admiralty Brass.
FLANGE TYPE: SLIPON (SO), SLIPON HUBBED (SOH), WELD NECK (WN), SOCKETWELD (SW), BLIND (BL), THREADED (TR), LAP JOINT (LJ), LONG WELD NECK (LWN), INTEGRAL (IT)
FLANGE FACE: FLAT FACE (FF), RAISED FACE (RF), RING TYPE JOINT (RTJ), TONGUE & GROOVE (T&G), MALE/FEMALE (MF), O RING
Size: 1/2” to 60” / DN 15 to DN 2000
ANSI / ASME B16.5 - CLASS 150#, 300#, 400#, 600#, 900#, 1500#, 2500#
ANSI / ASME B16.47 - CLASS 75#, 150#, 300#, 400#, 600#, 900#
ANSI / ASME B16.24 - CLASS 150#, 300#, 600#, 900#, 1500#, 2500#
ANSI / ASME B16.36 - CLASS 300#, 600#, 900#, 1500#, 2500#
DIN 2527 / 2528 / 2566 / 2573 / 2576 / 2627 / 2628 / 2629 / 2630 / 2631 / 2632 / 2633 / 2634 / 2635 / 2636 / 2637 / 2638 / 2641 / 2642 / 2655 / 2656 / 2673 FLANGE - PN2.5 / PN6, PN10, PN16, PN25, PN40, PN63, PN100, PN160, PN250, PN320, PN400
EN 1092-1 - PN2.5, PN6, PN10, PN16, PN25, PN40, PN63, PN100, PN160, PN250, PN320, PN400
BS 4504 - PN2.5, PN6, PN10, PN16, PN25, PN40
BS 10 - TABLE A, TABLE D, TABLE E, TABLE F, TABLE H, TABLE J, TABLE K, TABLE R, TABLE S, TABLE T
API 6A - TYPE 6B - 13.8 MPA / 2000 PSI, 20.7 MPA / 3000 PSI, 34.5 MPA / 5000 PSI, TYPE 6BX - 69 MPA / 10000 PSI, 103.5 MPa / 15000 PSI, 138 MPa / 20000 PSI
IS 6392 - CLASS 0.1, CLASS 0.25, CLASS 0.60, CLASS 1.0, CLASS 1.6, CLASS 2.5, CLASS 4.0, CLASS 6.4, CLASS 10.0, CLASS 16.0 (TABLE 2, TABLE 3, TABLE 4, TABLE 5, TABLE 6, TABLE 7, TABLE 8, TABLE 9, TABLE 10, TABLE 11, TABLE 12, TABLE 13, TABLE 14, TABLE 15, TABLE 16, TABLE 17, TABLE 18, TABLE 19, TABLE 20, TABLE 21, TABLE 22, TABLE 23, TABLE 24, TABLE 25, TABLE 26, TABLE 27, TABLE 28, TABLE 29, TABLE 30, TABLE 31, TABLE 32, TABLE 33, TABLE 34, TABLE 35, TABLE 36, TABLE 37, TABLE 38, TABLE 39, TABLE 40, TABLE 41, TABLE 42)
JIS B2220 - 2K, 5K, 10K, 16K, 20K, 30K, 40K, 63K
MSS SP44 - CLASS 150#, 300#, 400#, 600#, 900#
EEMUA 145 / 234 - 16 BAR, 20 BAR
Additional Information:
View Complete details
Product Brochure
Material | SS |
Type | Bar |
Usage/Application | Industrial |
Single Piece Length | 3 meter |
Surface Treatment | Polished |
Product Type | 625 Square Bar Rod |
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Country of Origin | Made in India |
Grade | Inconel 600, ASTM B564 / ASME SB564 UNS N06600 |
Size | 1/4" to 100" |
PRESSURE | 150# to 2500# |
Process | Forged |
Brand | Nufit |
Type | Slipon, Blind, Weldneck, Socketweld, Threaded |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Material Standard | ASTM B564, ASME SB564 |
Usage/Application | Oil |
Product Type | Slip On (SO), Blind (BL), Lap Joint (LF) Socketweld (SW), Weld Neck (WN), Long Weld Neck (LWN Flange |
I Deal In | New Only |
Size | 1/2" to 24" |
Grade | Inconel Alloy 600, 625, 718, 800, 825 |
Rated Pressure | ANSI B16.5 (150# to 2500#) |
Iso Certified | Yes |
Country of Origin | Made in India |
Dimension Standard | ASME B16.5, B16.47, DIN EN 1092-1, JIS B2220, BS 4504, BS 10 |
BRAND | NUFIT |
Face Type | Raised Face (RF), Flat Face (FF), Ring Type Joint (RTJ), Male/Female, Tongue & Groove |
We, Nufit Piping Solutions, are An ISO Certified Leading Manufacturer, Exporter & Supplier of Flanges in India. Nufit Piping Solutions is specialized manufacturer of all type of Flanges available in various grades, size & pressure rating.
Grade:
Stainless Steel: ASTM A182 - F201, F202, F301, F302, F304, F304L, F309, F310, F316, F316L, F316LN, F317L, F321, F347, 405, 409, 410, 420, 430, 440C, F904L.
Carbon Steel: SS 400, ASTM A105, ASTM A350 Gr. LF2, LF3, ASTM A694 - F42, F46, F48, F50, F52, F56, F60, F65, F70.
Alloy Steel: ASTM A182 - F11, F12, F22, F5, F9, F91.
Duplex Steel: ASTM A182 - 2205 (F51, S31803 / F60, S32205), SMO254 (F44, S31254), 2507 (F53, S32750), F55 (S32760), Ferralium 255 (F61, S32550).
Nickel Alloy: ASTM B564 - 200 (N02200), 201 (N02201), ASTM A182 - Alloy 20 (F20, N08020).
Inconel: ASTM B564 - 600 (N06600), 601 (N06601), 625 (N06625), 718, 800 (N08800), 800H (N08810), 800HT N08811), 825 (N08825), ASTM A182 - F904L (N08904).
Monel: ASTM B564 - 400 (N04400), 500 (N05500).
Hastelloy: ASTM B564 - C276 (N10276), C4 (N06455), C22 (N06022), C2000 (N06200), X (N06002),
B2 (N10665), B3 (N10675).
Titanium: ASTM B381 - F2, F5 (Ti6Al4V), F7.
Copper Alloy: Commercial, ETP, OFE, CuNi 90/10 (C70600), CuNi 70/30 (C71500), Brass, Naval Brass,
Nickel Aluminium Bronze C95800, C63000, Admiralty Brass.
FLANGE TYPE: SLIPON (SO), SLIPON HUBBED (SOH), WELD NECK (WN), SOCKETWELD (SW), BLIND (BL), THREADED (TR), LAP JOINT (LJ), LONG WELD NECK (LWN), INTEGRAL (IT)
FLANGE FACE: FLAT FACE (FF), RAISED FACE (RF), RING TYPE JOINT (RTJ), TONGUE & GROOVE (T&G), MALE/FEMALE (MF), O RING
Size: 1/2” to 60” / DN 15 to DN 2000
ANSI / ASME B16.5 - CLASS 150#, 300#, 400#, 600#, 900#, 1500#, 2500#
ANSI / ASME B16.47 - CLASS 75#, 150#, 300#, 400#, 600#, 900#
ANSI / ASME B16.24 - CLASS 150#, 300#, 600#, 900#, 1500#, 2500#
ANSI / ASME B16.36 - CLASS 300#, 600#, 900#, 1500#, 2500#
DIN 2527 / 2528 / 2566 / 2573 / 2576 / 2627 / 2628 / 2629 / 2630 / 2631 / 2632 / 2633 / 2634 / 2635 / 2636 / 2637 / 2638 / 2641 / 2642 / 2655 / 2656 / 2673 FLANGE - PN2.5 / PN6, PN10, PN16, PN25, PN40, PN63, PN100, PN160, PN250, PN320, PN400
EN 1092-1 - PN2.5, PN6, PN10, PN16, PN25, PN40, PN63, PN100, PN160, PN250, PN320, PN400
BS 4504 - PN2.5, PN6, PN10, PN16, PN25, PN40
BS 10 - TABLE A, TABLE D, TABLE E, TABLE F, TABLE H, TABLE J, TABLE K, TABLE R, TABLE S, TABLE T
API 6A - TYPE 6B - 13.8 MPA / 2000 PSI, 20.7 MPA / 3000 PSI, 34.5 MPA / 5000 PSI, TYPE 6BX - 69 MPA / 10000 PSI, 103.5 MPa / 15000 PSI, 138 MPa / 20000 PSI
IS 6392 - CLASS 0.1, CLASS 0.25, CLASS 0.60, CLASS 1.0, CLASS 1.6, CLASS 2.5, CLASS 4.0, CLASS 6.4, CLASS 10.0, CLASS 16.0 (TABLE 2, TABLE 3, TABLE 4, TABLE 5, TABLE 6, TABLE 7, TABLE 8, TABLE 9, TABLE 10, TABLE 11, TABLE 12, TABLE 13, TABLE 14, TABLE 15, TABLE 16, TABLE 17, TABLE 18, TABLE 19, TABLE 20, TABLE 21, TABLE 22, TABLE 23, TABLE 24, TABLE 25, TABLE 26, TABLE 27, TABLE 28, TABLE 29, TABLE 30, TABLE 31, TABLE 32, TABLE 33, TABLE 34, TABLE 35, TABLE 36, TABLE 37, TABLE 38, TABLE 39, TABLE 40, TABLE 41, TABLE 42)
JIS B2220 - 2K, 5K, 10K, 16K, 20K, 30K, 40K, 63K
MSS SP44 - CLASS 150#, 300#, 400#, 600#, 900#
EEMUA 145 / 234 - 16 BAR, 20 BAR
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Temperature Resistant | Yes |
Size | 1/2" to 24" |
Type | Reducer, Elbow, Tee, Cross, Reducer, Cap, Stubend, Barrel Nipple, Tee, Elbow |
Brand | NUFIT |
Thickness | SCH 20, 40, 40S, STD, 80, 80S, XS, 160, XXS |
Elbow Bend Angle | 45 Deg, 90 Deg |
Connection | Buttweld |
Material | Inconel |
Grade | ASTM B366 - 600 (WPNCI, N06600), 601 (N06601), 625 (WPNCMC, N06625), 718 (N07718) |
Usage/Application | Chemical Fertilizer Pipe |
Country of Origin | Made in India |
Form | Seamless, Welded |
Dimensions | ASME B16.9 |
Material Grade | 800 (WPNIC, N08800), 800H (WPNIC10, N08810), 800HT (WPNIC11, N08811), 825 (WPNICMC, N08825) |
MATERIAL STANDARD | ASTM B366, ASME SB366 |
Elbow Type | Short Radius Elbow/Bend, Long Radius Elbow/Bend, 90 Deg, 45 Deg, 180 Deg |
Reducer Type | Concentric Reducer, Eccentric Reducer |
Tee Type | Equal Tee, Reducing / Unequal Tee |
NUFIT PIPING SOLUTIONS is a company that manufactures & distributes Buttweld Fitting, Forged Socketweld Fitting & Forged Threaded Fittings of excellent quality in order to meet the requirements of all the industries. Our Pipe Fittings are manufactured according to international standards.
Buttweld Fitting:
Seamless/Welded - Elbow, Tee, Cross, Reducer, Cap, Stubend, Barrel Nipple
Size: 6 NB to 2400 NB x SCH 5 to SCH XXS.
Stainless Steel: ASTM A403 WP - 201, 202, 301, 302, 304, 304L, 309, 310, 316, 316L, 316LN, 316Ti, 317L, 321, 347, 409, 410, 904L.
Carbon Steel: ASTM A234 Gr. WPB, ASTM A420 Gr. WPL-3, WPL-6, IS 1239, IS 3589, ASTM A860 - WPHY42, WPHY46, WPHY52, WPHY60, WPHY65, WPHY70
Alloy Steel: ASTM A335 - WP11, WP12, WP22, WP5, WP9, WP91.
Duplex Steel: ASTM A815 - 2205 (S31803 / S32205), SMO254 (S31254), 2507 (S32750), S32760, Fe 255 (S32550).
Nickel Alloy: ASTM B366 - 200 (WPN, N02200), 201 (WPNL, N02201), Alloy 20 (WP20CB, N08020).
Inconel: ASTM B366 - 600 (WPNCI, N06600), 601 (N06601), 625 (WPNCMC, N06625), 718 (N07718), 800 (WPNIC, N08800), 800H (WPNIC10, N08810), 800HT (WPNIC11, N08811), 825 (WPNICMC, N08825), 904L (N08904).
Monel: ASTM B366 - 400 (WPNC, N04400), 500 (N05500).
Hastelloy: ASTM B366 - C276 (WPHC276, N10276), C4 (WPHC4, N06455), C22 (WPHC22, N06022), C2000 (WPHC2000, N06200), X (WPHX, N06002), B2 (WPHB-2, N10665), B3 (WPHB-3, N10675).
Titanium: ASTM B363 - WPT2, 5 (Ti6Al4V), WPT7.
Copper Alloy: Commercial, ETP, OFE, CuNi 90/10 (C70600), CuNi 70/30 (C71500), Brass, Naval Brass, Aluminium Bronze, Admiralty Brass.
Forged Fittings:
Socketweld/Threaded - Elbow, Tee, Cross, Reducer, Coupling, Cap, Hex Nipple, Hex Plug, Round Plug, Square Plug, Bushing, Union, Weldolet, Threadolet, Sockolet, Elbolet, Nipolet, Flangolet, Latrolet, Sweepolet.
Size: 15 NB to 100 NB x 2000# to 9000#.
Stainless Steel: ASTM A182 - F201, F202, F301, F302, F304, F304L, F309, F310, F316, F316L, F316LN, 316Ti, F317L, F321, F347, 405, 409, 410, F904L.
Carbon Steel: ASTM A105, ASTM A350 Gr. LF2, LF3, ASTM A694 - F42, F46, F48, F50, F52, F56, F60, F65, F70.
Alloy Steel: ASTM A182 - F11, F12, F22, F5, F9, F91.
Duplex Steel: ASTM A182 - 2205 (F51, S31803 / F60, S32205), SMO254 (F44, S31254), 2507 (F53, S32750), F55 (S32760), Ferralium 255 (F61, S32550).
Nickel Alloy: ASTM B564 - 200 (N02200), 201 (N02201), ASTM A182 - Alloy 20 (F20, N08020).
Inconel: ASTM B564 - 600 (N06600), 601 (N06601), 625 (N06625), 718, 800 (N08800), 800H (N08810), 800HT N08811), 825 (N08825), ASTM A182 - F904L (N08904).
Monel: ASTM B564 - 400 (N04400), 500 (N05500).
Hastelloy: ASTM B564 - C276 (N10276), C4 (N06455), C22 (N06022), C2000 (N06200), X (N06002), B2 (N10665), B3 (N10675).
Titanium: ASTM B381 - F2, F5 (Ti6Al4V), F7.
Copper Alloy: Commercial, ETP, OFE, CuNi 90/10 (C70600), CuNi 70/30 (C71500), Brass, Naval Brass, Aluminium Bronze, Admiralty Brass.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Standard | ASTM B366, ASME SB366 |
Grade | 600, 601, 625, 718, 800, 800H, 800HT, 825, 904L, 925, 926 |
Usage/Application | Chemical Handling |
End | Beveled End |
Tolerance | ASME B16.9 |
Country of Origin | Made in India |
Brand | NUFIT |
Size/Diameter | 1/2" to 24" |
Product Type | Elbow, Tee, Cross, Reducer, Cap, Stubend, Barrel Nipple |
Material Grade | ASTM B366 - 600 (WPNCI, N06600), 601 (N06601), 625 (WPNCMC, N06625), 718 (N07718) |
Material | 800 (WPNIC, N08800), 800H (WPNIC10, N08810), 800HT (WPNIC11, N08811), 825 (WPNICMC, N08825) |
Is It ISO Certified | ISO Certified |
Dimension Standard | ASME B16.9 |
MATERIAL STANDARD | ASTM B366, ASME SB366 |
FORM | Seamless, Welded |
TEST REPORT | Available |
Elbow Type | Short Radius Elbow/Bend, Long Radius Elbow/Bend, 45 Deg, 90 Deg, 180 Deg |
Reducer Type | Concentric Reducer, Eccentric Reducer |
Stubend Type | Long Stubend, Short Stubend |
NUFIT PIPING SOLUTIONS is a company that manufactures & distributes Buttweld Fitting, Forged Socketweld Fitting & Forged Threaded Fittings of excellent quality in order to meet the requirements of all the industries. Our Pipe Fittings are manufactured according to international standards.
Buttweld Fitting:
Seamless/Welded - Elbow, Tee, Cross, Reducer, Cap, Stubend, Barrel Nipple
Size: 6 NB to 2400 NB x SCH 5 to SCH XXS.
Stainless Steel: ASTM A403 WP - 201, 202, 301, 302, 304, 304L, 309, 310, 316, 316L, 316LN, 316Ti, 317L, 321, 347, 409, 410, 904L.
Carbon Steel: ASTM A234 Gr. WPB, ASTM A420 Gr. WPL-3, WPL-6, IS 1239, IS 3589, ASTM A860 - WPHY42, WPHY46, WPHY52, WPHY60, WPHY65, WPHY70
Alloy Steel: ASTM A335 - WP11, WP12, WP22, WP5, WP9, WP91.
Duplex Steel: ASTM A815 - 2205 (S31803 / S32205), SMO254 (S31254), 2507 (S32750), S32760, Fe 255 (S32550).
Nickel Alloy: ASTM B366 - 200 (WPN, N02200), 201 (WPNL, N02201), Alloy 20 (WP20CB, N08020).
Inconel: ASTM B366 - 600 (WPNCI, N06600), 601 (N06601), 625 (WPNCMC, N06625), 718 (N07718), 800 (WPNIC, N08800), 800H (WPNIC10, N08810), 800HT (WPNIC11, N08811), 825 (WPNICMC, N08825), 904L (N08904).
Monel: ASTM B366 - 400 (WPNC, N04400), 500 (N05500).
Hastelloy: ASTM B366 - C276 (WPHC276, N10276), C4 (WPHC4, N06455), C22 (WPHC22, N06022), C2000 (WPHC2000, N06200), X (WPHX, N06002), B2 (WPHB-2, N10665), B3 (WPHB-3, N10675).
Titanium: ASTM B363 - WPT2, 5 (Ti6Al4V), WPT7.
Copper Alloy: Commercial, ETP, OFE, CuNi 90/10 (C70600), CuNi 70/30 (C71500), Brass, Naval Brass, Aluminium Bronze, Admiralty Brass.
Forged Fittings:
Socketweld/Threaded - Elbow, Tee, Cross, Reducer, Coupling, Cap, Hex Nipple, Hex Plug, Round Plug, Square Plug, Bushing, Union, Weldolet, Threadolet, Sockolet, Elbolet, Nipolet, Flangolet, Latrolet, Sweepolet.
Size: 15 NB to 100 NB x 2000# to 9000#.
Stainless Steel: ASTM A182 - F201, F202, F301, F302, F304, F304L, F309, F310, F316, F316L, F316LN, 316Ti, F317L, F321, F347, 405, 409, 410, F904L.
Carbon Steel: ASTM A105, ASTM A350 Gr. LF2, LF3, ASTM A694 - F42, F46, F48, F50, F52, F56, F60, F65, F70.
Alloy Steel: ASTM A182 - F11, F12, F22, F5, F9, F91.
Duplex Steel: ASTM A182 - 2205 (F51, S31803 / F60, S32205), SMO254 (F44, S31254), 2507 (F53, S32750), F55 (S32760), Ferralium 255 (F61, S32550).
Nickel Alloy: ASTM B564 - 200 (N02200), 201 (N02201), ASTM A182 - Alloy 20 (F20, N08020).
Inconel: ASTM B564 - 600 (N06600), 601 (N06601), 625 (N06625), 718, 800 (N08800), 800H (N08810), 800HT N08811), 825 (N08825), ASTM A182 - F904L (N08904).
Monel: ASTM B564 - 400 (N04400), 500 (N05500).
Hastelloy: ASTM B564 - C276 (N10276), C4 (N06455), C22 (N06022), C2000 (N06200), X (N06002), B2 (N10665), B3 (N10675).
Titanium: ASTM B381 - F2, F5 (Ti6Al4V), F7.
Copper Alloy: Commercial, ETP, OFE, CuNi 90/10 (C70600), CuNi 70/30 (C71500), Brass, Naval Brass, Aluminium Bronze, Admiralty Brass.
Additional Information:
View Complete details
Minimum Order Quantity: 10 Piece
Product Brochure
Material Grade | Inconel 600, 625, 718, 800 |
Country of Origin | Made in India |
Grade | Inconel 600, 625, 718, 800 |
Type | Stud Bolt, Hex Bolt, Allen Bolt, Threaded Rod, Hex Nut, Plain Washer, Spring Washer |
Fastener Type | Stud Bolt, Hex Bolt, Allen Bolt, Threaded Rod, Hex Nut, Plain Washer, Spring Washer |
Head Type | Hex, Square, Round, Allen Cap |
I Deal In | New Only |
Size | Metric - M3 to M100 & Imperial -1/8" to 4" |
BRAND | NUFIT |
Nufit Piping Solutions maintains a large inventory of Inconel Alloy Hex Bolt, Stud Bolt, Hex Nut & Plain Washer. Inconel alloys are oxidation-corrosion-resistant materials well suited for service in extreme environments subjected to pressure and heat. When heated, Inconel forms a thick, stable, passivating oxide layer protecting the surface from further attack. Inconel retains strength over a wide temperature range, attractive for high-temperature applications where aluminium and steel would succumb to creep as a result of thermally-induced crystal vacancies. Inconel's high-temperature strength is developed by solid solution strengthening or precipitation hardening, depending on the alloy.
Inconel alloys are typically used in high temperature applications. Common trade names for
· Inconel Alloy 625 include: Inconel 625, Chronin 625, Altemp 625, Haynes 625, Nickelvac 625 Nicrofer 6020 and UNS designation N06625
· Inconel Alloy 600 include: NA14, BS3076, 2.4816, NiCr15Fe (FR), NiCr15Fe (EU), NiCr15Fe8 (DE) and UNS designation N06600
· Inconel 718 include: Nicrofer 5219, Superimphy 718, Haynes 718, Pyromet 718, Supermet 718, Udimet 718 and UNS designation N07718
Form: Hex Bolt, Square Bolt, Stud Bolt, Threaded Bar, Allen Bolt, Flat Screw, Grub Screw, Hex Nut, Square Nut, Plain Washer, Spring Washer
Inconel Grades: 600, 601, 617, 625, 718, 800, 825, X750, 925
Size: Metric - M3 mm to M100 & Imperial - 1/8” to 4”
Additional Information:
View Complete details
Minimum Order Quantity: 10 Piece
Product Brochure
Standard | ASTM B564, ASME SB564 |
Material Grade | Inconel 600, 625, 718, 800 |
Is It Customised | Customisation |
Material | Inconel |
I Deal In | New Only |
Country of Origin | Made in India |
BRAND | NUFIT |
Type | Stud Bolt, Hex Bolt, Allen Bolt, Threaded Rod, Hex Nut, Plain Washer, Spring Washer |
Fastener Size | Metric - M3 to M100 & Imperial - 1/8" to 4" |
Nufit Piping Solutions maintains a large inventory of Inconel Alloy Hex Bolt, Stud Bolt, Hex Nut & Plain Washer. Inconel alloys are oxidation-corrosion-resistant materials well suited for service in extreme environments subjected to pressure and heat. When heated, Inconel forms a thick, stable, passivating oxide layer protecting the surface from further attack. Inconel retains strength over a wide temperature range, attractive for high-temperature applications where aluminium and steel would succumb to creep as a result of thermally-induced crystal vacancies. Inconel's high-temperature strength is developed by solid solution strengthening or precipitation hardening, depending on the alloy.
Inconel alloys are typically used in high temperature applications. Common trade names for
· Inconel Alloy 625 include: Inconel 625, Chronin 625, Altemp 625, Haynes 625, Nickelvac 625 Nicrofer 6020 and UNS designation N06625
· Inconel Alloy 600 include: NA14, BS3076, 2.4816, NiCr15Fe (FR), NiCr15Fe (EU), NiCr15Fe8 (DE) and UNS designation N06600
· Inconel 718 include: Nicrofer 5219, Superimphy 718, Haynes 718, Pyromet 718, Supermet 718, Udimet 718 and UNS designation N07718
Form: Hex Bolt, Square Bolt, Stud Bolt, Threaded Bar, Allen Bolt, Flat Screw, Grub Screw, Hex Nut, Square Nut, Plain Washer, Spring Washer
Inconel Grades: 600, 601, 617, 625, 718, 800, 825, X750, 925
Size: Metric - M3 mm to M100 & Imperial - 1/8” to 4”
Additional Information:
View Complete details
Minimum Order Quantity: 5 Kg
Product Brochure
Grade | ASTM B443 - 718 (N07718), B409 - 800 (N08800), 800H (N08810), 800HT (N08811), B424 - 825 (N08825) |
Brand | Nufit |
Standard Grade | ASTM B443, B409, B424 |
Available Forms | Sheet, Plate, Coil, Circle, Profile, Flat, Strip |
Country of Origin | Made in India |
Thickness | 0.5 MM TO 100 MM |
Material | Inconel. Incoloy |
Additional Information:
View Complete details
Minimum Order Quantity: 5 Kg
Product Brochure
Available Forms | Sheet, Plate, Coil, Circle, Profile, Flat, Strip |
Country of Origin | Made in India |
Thickness | 0.5 MM TO 100 MM |
Material | Inconel. Incoloy |
Brand | Nufit |
Grade | ASTM B443 - 718 (N07718), B409 - 800 (N08800), 800H (N08810), 800HT (N08811), B424 - 825 (N08825) |
Standard Grade | ASTM B443, B409, B424 |
Additional Information:
View Complete details