NUFIT PIPING SOLUTIONS

NUFIT PIPING SOLUTIONS is manufacturer & supplier of Duplex Steel 254 SMO (UNS S31254, ASTM F44, 1.4547) is a so-called super austenitic stainless steel. By increasing the molybdenum content to 6%, it achieves a pitting resistance equivalent number (PREN) > 43, which is similar to that of a super duplex stainless steel (SDSS).

 

When comparing 254SMO vs super duplex stainless steels, it is non-magnetic, potentially more straightforward to weld and has a wider operating temperature range. However, it is considerably more expensive due to its greater nickel and molybdenum content and has a significantly lower strength. Therefore, it will mostly be used in applications where the use of super duplex stainless steels is limited. This could include applications at lower temperatures (<-50degC) where the impact strength of SDSS drops, or at higher temperatures (>250degC) where there is a risk of forming deleterious phases if exposed for extended periods.

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: Transport Worthy

NUFIT PIPING SOLUTIONS supplies Duplex Stainless Steel Pipe & Tube in Grade 2205 / UNS S31803 / UNS S32205

These pipes are available in differen size & schedule / thickness as per requirement.

Duplex stainless steel grades have a ferritic-austenitic microstructure, with a phase balance of approximately 50% ferrite and 50% austenite. They combine many of the beneficial properties of ferritic and austenitic stainless steels. The duplex microstructure contributes to the high mechanical strength and high resistance to stress corrosion cracking.

The high strength of duplex steel grades is also a result of alloying with nitrogen. Other characteristic properties of duplex steel grades include good abrasion and erosion resistance, good fatigue resistance, high-energy absorption and low thermal expansion.

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: TRANSPORT WORTHY

Nufit Piping Solutions is manufacturer & exporter of Super Duplex Stainless Steel UNS S32750 / 2507 Round Bar / Rod available in various size.

 

Super Duplex UNS S32750 is the most common super duplex grade in the market. UNS S32750 is a duplex stainless steel especially designed for service in aggressive chloride-containing environments. It has very good resistance to localized corrosion and stress corrosion cracking in combination with high mechanical strength. It is widely used in oil & gas, hydropower, pressure vessels, pulp & paper, structural components and chemical tankers.

 

Applications

The main applications are for details with special requirements for high corrosion resistance.

 

UNS S32750 is characterized by:

·         High resistance to stress corrosion cracking in halide containing environments.

·         High resistance to pitting and crevice corrosion.

·         High resistance to general corrosion.

·         High mechanical strength.

·         High resistance to erosion corrosion and corrosion fatigue.

 

Size: DIA 3 mm to DIA 400 mm

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: TRANSPORT WORTHY

Nufit Piping Solutions is manufacturer & exporter of Super Duplex Stainless Steel UNS S32750 / 2507 Seamless Pipe available in various size & thickness.

 

Super Duplex UNS S32750 is the most common super duplex grade in the market. UNS S32750 is a duplex stainless steel especially designed for service in aggressive chloride-containing environments. It has very good resistance to localized corrosion and stress corrosion cracking in combination with high mechanical strength. It is widely used in oil & gas, hydropower, pressure vessels, pulp & paper, structural components and chemical tankers.

 

Applications

The main applications are for details with special requirements for high corrosion resistance.

 

UNS S32750 is characterized by:

·         High resistance to stress corrosion cracking in halide containing environments.

·         High resistance to pitting and crevice corrosion.

·         High resistance to general corrosion.

·         High mechanical strength.

·         High resistance to erosion corrosion and corrosion fatigue.

 

Size: 1/2" to 24" x SCH 5 to SCH XXS

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: TRANSPORT WORTHY

 We are offering Duplex Steel 2205 Round Bar to our clients

Nufit Piping Solutions is manufacturer, exporter & supplier of Pipe, Tube, Fittings, Flanges, Spool Piece, Sheet, Plate, Bar, Fasteners, Valves, Wire Mesh, Customised Components, etc. in Stainless Steel, Carbon Steel, Alloy Steel, Duplex Steel, Nickel Alloy, Inconel, Monel, Hastelloy, Copper, Copper Nickel, Nickel Aluminium Bronze, Brass / Bronze, Magnesium Alloy, Aluminium, Titanium, Molybdenum, Tantalum, Niobium, etc.

 We are offering Duplex Steel 2205 Buttweld Pipe Fitting to our clients

Nufit Piping Solutions is manufacturer, exporter & supplier of Pipe, Tube, Fittings, Flanges, Spool Piece, Sheet, Plate, Bar, Fasteners, Valves, Wire Mesh, Customised Components, etc. in Stainless Steel, Carbon Steel, Alloy Steel, Duplex Steel, Nickel Alloy, Inconel, Monel, Hastelloy, Copper, Copper Nickel, Nickel Aluminium Bronze, Brass / Bronze, Magnesium Alloy, Aluminium, Titanium, Molybdenum, Tantalum, Niobium, etc.

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: TRANSPORT WORTHY

NUFIT PIPING SOLUTIONS is manufacturer & supplier of Super Duplex Steel UNS S32760. Containing 25% chromium, 7% nickel, 3.6% molybdenum as well as copper, tungsten, and nitrogen, UNS S32760 is a highly alloyed super duplex stainless steel with high PREN for use in aggressive environments.

This is a super duplex grade with a ferritic-austenitic microstructure. The alloy consists of around 40-50% ferrite in the annealed condition. The super duplex microstructure has the high strength of the ferritic grades whilst retaining the corrosion resistance of the austenitic grades. It is not uncommon to see the metal used as a practical solution to chloride-induced stress cracking, which is the Achilles’ heel of stainless steel.

It also has outstanding resistance against sulphide-stress corrosion cracking in sour-gas environments.

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: Transport Worthy

NUFIT PIPING SOLUTIONS is manufacturer & supplier of Super Duplex Steel UNS S32760. Containing 25% chromium, 7% nickel, 3.6% molybdenum as well as copper, tungsten, and nitrogen, UNS S32760 is a highly alloyed super duplex stainless steel with high PREN for use in aggressive environments.

This is a super duplex grade with a ferritic-austenitic microstructure. The alloy consists of around 40-50% ferrite in the annealed condition. The super duplex microstructure has the high strength of the ferritic grades whilst retaining the corrosion resistance of the austenitic grades. It is not uncommon to see the metal used as a practical solution to chloride-induced stress cracking, which is the Achilles’ heel of stainless steel.

It also has outstanding resistance against sulphide-stress corrosion cracking in sour-gas environments.

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: Transport Worthy

NUFIT PIPING SOLUTIONS is manufacturer & supplier of Duplex Steel 254 SMO (UNS S31254, ASTM F44, 1.4547) is a so-called super austenitic stainless steel. By increasing the molybdenum content to 6%, it achieves a pitting resistance equivalent number (PREN) > 43, which is similar to that of a super duplex stainless steel (SDSS).

 

When comparing 254SMO vs super duplex stainless steels, it is non-magnetic, potentially more straightforward to weld and has a wider operating temperature range. However, it is considerably more expensive due to its greater nickel and molybdenum content and has a significantly lower strength. Therefore, it will mostly be used in applications where the use of super duplex stainless steels is limited. This could include applications at lower temperatures (<-50degC) where the impact strength of SDSS drops, or at higher temperatures (>250degC) where there is a risk of forming deleterious phases if exposed for extended periods.

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: Transport Worthy

NUFIT PIPING SOLUTIONS is manufacturer & supplier of Duplex Steel 254 SMO (UNS S31254, ASTM F44, 1.4547) is a so-called super austenitic stainless steel. By increasing the molybdenum content to 6%, it achieves a pitting resistance equivalent number (PREN) > 43, which is similar to that of a super duplex stainless steel (SDSS).

 

When comparing 254SMO vs super duplex stainless steels, it is non-magnetic, potentially more straightforward to weld and has a wider operating temperature range. However, it is considerably more expensive due to its greater nickel and molybdenum content and has a significantly lower strength. Therefore, it will mostly be used in applications where the use of super duplex stainless steels is limited. This could include applications at lower temperatures (<-50degC) where the impact strength of SDSS drops, or at higher temperatures (>250degC) where there is a risk of forming deleterious phases if exposed for extended periods.

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: Transport Worthy

NUFIT PIPING SOLUTIONS is manufacturer & supplier of Duplex Steel 254 SMO (UNS S31254, ASTM F44, 1.4547) is a so-called super austenitic stainless steel. By increasing the molybdenum content to 6%, it achieves a pitting resistance equivalent number (PREN) > 43, which is similar to that of a super duplex stainless steel (SDSS).

 

When comparing 254SMO vs super duplex stainless steels, it is non-magnetic, potentially more straightforward to weld and has a wider operating temperature range. However, it is considerably more expensive due to its greater nickel and molybdenum content and has a significantly lower strength. Therefore, it will mostly be used in applications where the use of super duplex stainless steels is limited. This could include applications at lower temperatures (<-50degC) where the impact strength of SDSS drops, or at higher temperatures (>250degC) where there is a risk of forming deleterious phases if exposed for extended periods.

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: Transport Worthy

NUFIT PIPING SOLUTIONS is manufacturer & supplier of Super Duplex Steel UNS S32760. Containing 25% chromium, 7% nickel, 3.6% molybdenum as well as copper, tungsten, and nitrogen, UNS S32760 is a highly alloyed super duplex stainless steel with high PREN for use in aggressive environments.

This is a super duplex grade with a ferritic-austenitic microstructure. The alloy consists of around 40-50% ferrite in the annealed condition. The super duplex microstructure has the high strength of the ferritic grades whilst retaining the corrosion resistance of the austenitic grades. It is not uncommon to see the metal used as a practical solution to chloride-induced stress cracking, which is the Achilles’ heel of stainless steel.

It also has outstanding resistance against sulphide-stress corrosion cracking in sour-gas environments.

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: Transport Worthy

We, Nufit Piping Solutions, are An ISO Certified Leading Manufacturer, Exporter & Supplier of Flanges in India. Nufit Piping Solutions is specialized manufacturer of all type of Flanges available in various grades, size & pressure rating.

 

Grade:

Stainless Steel: ASTM A182 - F201, F202, F301, F302, F304, F304L, F309, F310, F316, F316L, F316LN, F317L, F321, F347, 405, 409, 410, 420, 430, 440C, F904L.

Carbon Steel: SS 400, ASTM A105, ASTM A350 Gr. LF2, LF3, ASTM A694 - F42, F46, F48, F50, F52, F56, F60, F65, F70.

Alloy Steel: ASTM A182 - F11, F12, F22, F5, F9, F91.

Duplex Steel: ASTM A182 - 2205 (F51, S31803 / F60, S32205), SMO254 (F44, S31254), 2507 (F53, S32750), F55 (S32760), Ferralium 255 (F61, S32550).

Nickel Alloy: ASTM B564 - 200 (N02200), 201 (N02201), ASTM A182 - Alloy 20 (F20, N08020).

Inconel: ASTM B564 - 600 (N06600), 601 (N06601), 625 (N06625), 718, 800 (N08800), 800H (N08810), 800HT N08811), 825 (N08825), ASTM A182 - F904L (N08904).

Monel: ASTM B564 - 400 (N04400), 500 (N05500).

Hastelloy: ASTM B564 - C276 (N10276), C4 (N06455), C22 (N06022), C2000 (N06200), X (N06002),

B2 (N10665), B3 (N10675).

Titanium: ASTM B381 - F2, F5 (Ti6Al4V), F7.

Copper Alloy: Commercial, ETP, OFE, CuNi 90/10 (C70600), CuNi 70/30 (C71500), Brass, Naval Brass,

Nickel Aluminium Bronze C95800, C63000, Admiralty Brass.

 

FLANGE TYPE: SLIPON (SO), SLIPON HUBBED (SOH), WELD NECK (WN), SOCKETWELD (SW), BLIND (BL), THREADED (TR), LAP JOINT (LJ), LONG WELD NECK (LWN), INTEGRAL (IT)

 

FLANGE FACE: FLAT FACE (FF), RAISED FACE (RF), RING TYPE JOINT (RTJ), TONGUE & GROOVE (T&G), MALE/FEMALE (MF), O RING

 

Size: 1/2” to 60” / DN 15 to DN 2000

 

ANSI / ASME B16.5 - CLASS 150#, 300#, 400#, 600#, 900#, 1500#, 2500#

ANSI / ASME B16.47 - CLASS 75#, 150#, 300#, 400#, 600#, 900#

ANSI / ASME B16.24 - CLASS 150#, 300#, 600#, 900#, 1500#, 2500#

ANSI / ASME B16.36 - CLASS 300#, 600#, 900#, 1500#, 2500#

DIN 2527 / 2528 / 2566 / 2573 / 2576 / 2627 / 2628 / 2629 / 2630 / 2631 / 2632 / 2633 / 2634 / 2635 / 2636 / 2637 / 2638 / 2641 / 2642 / 2655 / 2656 / 2673 FLANGE - PN2.5 / PN6, PN10, PN16, PN25, PN40, PN63, PN100, PN160, PN250, PN320, PN400

EN 1092-1 - PN2.5, PN6, PN10, PN16, PN25, PN40, PN63, PN100, PN160, PN250, PN320, PN400

BS 4504 - PN2.5, PN6, PN10, PN16, PN25, PN40

BS 10 - TABLE A, TABLE D, TABLE E, TABLE F, TABLE H, TABLE J, TABLE K, TABLE R, TABLE S, TABLE T

API 6A - TYPE 6B - 13.8 MPA / 2000 PSI, 20.7 MPA / 3000 PSI, 34.5 MPA / 5000 PSI, TYPE 6BX - 69 MPA / 10000 PSI, 103.5 MPa / 15000 PSI, 138 MPa / 20000 PSI

IS 6392 - CLASS 0.1, CLASS 0.25, CLASS 0.60, CLASS 1.0, CLASS 1.6, CLASS 2.5, CLASS 4.0, CLASS 6.4, CLASS 10.0, CLASS 16.0 (TABLE 2, TABLE 3, TABLE 4, TABLE 5, TABLE 6, TABLE 7, TABLE 8, TABLE 9, TABLE 10, TABLE 11, TABLE 12, TABLE 13, TABLE 14, TABLE 15, TABLE 16, TABLE 17, TABLE 18, TABLE 19, TABLE 20, TABLE 21, TABLE 22, TABLE 23, TABLE 24, TABLE 25, TABLE 26, TABLE 27, TABLE 28, TABLE 29, TABLE 30, TABLE 31, TABLE 32, TABLE 33, TABLE 34, TABLE 35, TABLE 36, TABLE 37, TABLE 38, TABLE 39, TABLE 40, TABLE 41, TABLE 42)

JIS B2220 - 2K, 5K, 10K, 16K, 20K, 30K, 40K, 63K

MSS SP44 - CLASS 150#, 300#, 400#, 600#, 900#

EEMUA 145 / 234 - 16 BAR, 20 BAR

 

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: TRANSPORT WORTHY

Nufit Piping Solutions is manufacturer & exporter of Super Duplex Stainless Steel UNS S32750 / 2507 Buttweld Pipe Fitting available in various size & thickness in forms of Seamless/Welded - Elbow, Tee, Cross, Reducer, Cap, Stubend, Barrel Nipple.

 

Super Duplex UNS S32750 is the most common super duplex grade in the market. UNS S32750 is a duplex stainless steel especially designed for service in aggressive chloride-containing environments. It has very good resistance to localized corrosion and stress corrosion cracking in combination with high mechanical strength. It is widely used in oil & gas, hydropower, pressure vessels, pulp & paper, structural components and chemical tankers.

 

Applications

The main applications are for details with special requirements for high corrosion resistance.

 

UNS S32750 is characterized by:

·         High resistance to stress corrosion cracking in halide containing environments.

·         High resistance to pitting and crevice corrosion.

·         High resistance to general corrosion.

·         High mechanical strength.

·         High resistance to erosion corrosion and corrosion fatigue.

 

Size: 6 NB to 2400 NB x SCH 5 to SCH XXS

Grade: ASTM A815 / ASME SA815 - 2205 (S31803 / S32205), SMO254 (S31254), 2507 (S32750), S32760, Fe 255 (S32550).

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: TRANSPORT WORTHY

Nufit Piping Solutions is manufacturer & exporter of Super Duplex Stainless Steel UNS S32750 / 2507 Sheet / Plate available in various size & thickness in forms of Sheet, Plate, Coil, Flat, Strip, Circle, Pro le, Shim, Foil, Chequered Plate.

 

Super Duplex UNS S32750 is the most common super duplex grade in the market. UNS S32750 is a duplex stainless steel especially designed for service in aggressive chloride-containing environments. It has very good resistance to localized corrosion and stress corrosion cracking in combination with high mechanical strength. It is widely used in oil & gas, hydropower, pressure vessels, pulp & paper, structural components and chemical tankers.

 

Applications

The main applications are for details with special requirements for high corrosion resistance.

 

UNS S32750 is characterized by:

·         High resistance to stress corrosion cracking in halide containing environments.

·         High resistance to pitting and crevice corrosion.

·         High resistance to general corrosion.

·         High mechanical strength.

·         High resistance to erosion corrosion and corrosion fatigue.

 

Size: 0.5 mm to 120 mm

Grade: ASTM A240 / ASME SA240 - 2205 (S31803 / S32205), SMO254 (S31254), 2507 (S32750), ZERON 100 (S32760), Ferralium 255 (S32550), LDX 2101 (S32101)

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: TRANSPORT WORTHY

Nufit Piping Solutions is manufacturer & exporter of Super Duplex Stainless Steel UNS S32750 / 2507 Fastener available in various size & length in forms of Hex Bolt, Square Bolt, Stud Bolt, Threaded Bar, Allen Bolt, Flat Screw, Grub Screw, Hex Nut, Square Nut, Plain Washer, Spring Washer.

 

 

Super Duplex UNS S32750 is the most common super duplex grade in the market. UNS S32750 is a duplex stainless steel especially designed for service in aggressive chloride-containing environments. It has very good resistance to localized corrosion and stress corrosion cracking in combination with high mechanical strength. It is widely used in oil & gas, hydropower, pressure vessels, pulp & paper, structural components and chemical tankers.

 

Applications

The main applications are for details with special requirements for high corrosion resistance.

 

UNS S32750 is characterized by:

·         High resistance to stress corrosion cracking in halide containing environments.

·         High resistance to pitting and crevice corrosion.

·         High resistance to general corrosion.

·         High mechanical strength.

·         High resistance to erosion corrosion and corrosion fatigue.

 

Size: M3 to M100 (1/8" to 4")

Grade: ASTM A182 / ASME SA182 - 2205 (F51, S31803 / F60, S32205), SMO254 (F44, S31254), 2507 (F53, S32750), F55 (S32760), Ferralium 255 (F61, S32550)

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: TRANSPORT WORTHY

NUFIT PIPING SOLUTIONS is a manufacturer & exporter of Super Duplex Stainless Steel Flange in ASTM A182 / ASME SA182 F53, F55 Flange. These flanges are available in SAF 2507, UNS S32750 & UNS S32760 Grades.

Size: DN 6 to DN 2500

Additional Information:

• Delivery Time: READY STOCk
• Packaging Details: TRANSPORT WORTHY

Nufit Piping Solutions manufactures Duplex Steel 2205 Flange. We manufacture Slipon, Blind, Weldneck, Socketweld flanges with RF, FF & RTJ Face.

These flange manufactured according to ASTM A182 / ASME SA182 Standards in F51, F53, F55, F44, F60 Grades and Dimensions according to ANSI, DIN, BS, API, IS, JIS, MSS, UNI Standards & as per drawing also.

Additional Information:

• Delivery Time: Ready Stock

We are offering Duplex Steel 2205 Sheet to our clients

Nufit Piping Solutions is manufacturer, exporter & supplier of Pipe, Tube, Fittings, Flanges, Spool Piece, Sheet, Plate, Bar, Fasteners, Valves, Wire Mesh, Customised Components, etc. in Stainless Steel, Carbon Steel, Alloy Steel, Duplex Steel, Nickel Alloy, Inconel, Monel, Hastelloy, Copper, Copper Nickel, Nickel Aluminium Bronze, Brass / Bronze, Magnesium Alloy, Aluminium, Titanium, Molybdenum, Tantalum, Niobium, etc.

NUFIT PIPING SOLUTIONS is manufacturer & supplier of Super Duplex Steel UNS S32760. Containing 25% chromium, 7% nickel, 3.6% molybdenum as well as copper, tungsten, and nitrogen, UNS S32760 is a highly alloyed super duplex stainless steel with high PREN for use in aggressive environments.

This is a super duplex grade with a ferritic-austenitic microstructure. The alloy consists of around 40-50% ferrite in the annealed condition. The super duplex microstructure has the high strength of the ferritic grades whilst retaining the corrosion resistance of the austenitic grades. It is not uncommon to see the metal used as a practical solution to chloride-induced stress cracking, which is the Achilles’ heel of stainless steel.

It also has outstanding resistance against sulphide-stress corrosion cracking in sour-gas environments.

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: Transport Worthy

NUFIT PIPING SOLUTIONS is manufacturer & supplier of Duplex Steel 254 SMO (UNS S31254, ASTM F44, 1.4547) is a so-called super austenitic stainless steel. By increasing the molybdenum content to 6%, it achieves a pitting resistance equivalent number (PREN) > 43, which is similar to that of a super duplex stainless steel (SDSS).

 

When comparing 254SMO vs super duplex stainless steels, it is non-magnetic, potentially more straightforward to weld and has a wider operating temperature range. However, it is considerably more expensive due to its greater nickel and molybdenum content and has a significantly lower strength. Therefore, it will mostly be used in applications where the use of super duplex stainless steels is limited. This could include applications at lower temperatures (<-50degC) where the impact strength of SDSS drops, or at higher temperatures (>250degC) where there is a risk of forming deleterious phases if exposed for extended periods.

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: Transport Worthy

NUFIT PIPING SOLUTIONS is manufacturer & supplier of Duplex Steel 254 SMO (UNS S31254, ASTM F44, 1.4547) is a so-called super austenitic stainless steel. By increasing the molybdenum content to 6%, it achieves a pitting resistance equivalent number (PREN) > 43, which is similar to that of a super duplex stainless steel (SDSS).

 

When comparing 254SMO vs super duplex stainless steels, it is non-magnetic, potentially more straightforward to weld and has a wider operating temperature range. However, it is considerably more expensive due to its greater nickel and molybdenum content and has a significantly lower strength. Therefore, it will mostly be used in applications where the use of super duplex stainless steels is limited. This could include applications at lower temperatures (<-50degC) where the impact strength of SDSS drops, or at higher temperatures (>250degC) where there is a risk of forming deleterious phases if exposed for extended periods.

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: Transport Worthy

NUFIT PIPING SOLUTIONS is manufacturer & supplier of Super Duplex Steel UNS S32760. Containing 25% chromium, 7% nickel, 3.6% molybdenum as well as copper, tungsten, and nitrogen, UNS S32760 is a highly alloyed super duplex stainless steel with high PREN for use in aggressive environments.

This is a super duplex grade with a ferritic-austenitic microstructure. The alloy consists of around 40-50% ferrite in the annealed condition. The super duplex microstructure has the high strength of the ferritic grades whilst retaining the corrosion resistance of the austenitic grades. It is not uncommon to see the metal used as a practical solution to chloride-induced stress cracking, which is the Achilles’ heel of stainless steel.

It also has outstanding resistance against sulphide-stress corrosion cracking in sour-gas environments.

Additional Information:

• Delivery Time: Ready STock
• Packaging Details: Transport Worthy

NUFIT PIPING SOLUTIONS is manufacturer & supplier of Super Duplex Steel UNS S32760. Containing 25% chromium, 7% nickel, 3.6% molybdenum as well as copper, tungsten, and nitrogen, UNS S32760 is a highly alloyed super duplex stainless steel with high PREN for use in aggressive environments.

This is a super duplex grade with a ferritic-austenitic microstructure. The alloy consists of around 40-50% ferrite in the annealed condition. The super duplex microstructure has the high strength of the ferritic grades whilst retaining the corrosion resistance of the austenitic grades. It is not uncommon to see the metal used as a practical solution to chloride-induced stress cracking, which is the Achilles’ heel of stainless steel.

It also has outstanding resistance against sulphide-stress corrosion cracking in sour-gas environments.

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: Transport Worthy

We are offering Duplex Steel 2205 Stud Bolt, Nut & Washer to our clients

Nufit Piping Solutions is manufacturer, exporter & supplier of Pipe, Tube, Fittings, Flanges, Spool Piece, Sheet, Plate, Bar, Fasteners, Valves, Wire Mesh, Customised Components, etc. in Stainless Steel, Carbon Steel, Alloy Steel, Duplex Steel, Nickel Alloy, Inconel, Monel, Hastelloy, Copper, Copper Nickel, Nickel Aluminium Bronze, Brass / Bronze, Magnesium Alloy, Aluminium, Titanium, Molybdenum, Tantalum, Niobium, etc.

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: Transport Worthy