Mumbai, Maharashtra
GST No. 27CFYPS7164C1ZQ
Call 08047651916 92% Response Rate
Minimum Order Quantity: 50 Kg
Product Brochure
Brand | Nufit |
Shape | Rectangular |
Country of Origin | Made in India |
Usage/Application | Industrial |
Material Grade | 13% & 20% Manganese Steel |
Thickness | 3 MM TO 100 MM |
Nufit Piping Solutions is a exporter & supplier of High Manganese Steel Plate available in various sizes.
This high manganese grade is an excellent work hardening, abrasion-resistant steel. This steel is a non-magnetic austenitic type, supplied in full plates or as profiled pieces by plasma cutting. Suitable for wear applications where high impact/gouging abrasion leads to a work hardening effect.
High manganese steel plate becomes increasingly hard when the surfaces of components are subject to repeated impact or abrasion. Its toughness, derived from high tensile strength and ductility, enables shock leads to be absorbed safely. Lack of lubrication or the intrusion of grit or sand particles does not seriously impair the wearing surfaces of components in contact. These characteristics combine to make high manganese steel plate an ideal steel for use as wearing plates in those situations where abrasion, impact, or lubrication difficulties are encountered. The steel has the unique property in service of rapidly developing a work-hardened surface while retaining its tough interior.
Wear Resistance of Manganese Plate
Severe wear on the surface has a work-hardening affect on the austenitic structure of this steel. This leads to an increase from the initially low hardness (about 200 BHN) to a service hardness of at least 500 BHN. This work-hardening maintains itself through in-service life. The underlays not work-hardened maintain a very high resistance to shock.
Size: 3 mm to 100 mm
Additional Information:
View Complete details
Minimum Order Quantity: 50 Kg
Product Brochure
Usage/Application | Material Handling |
Shape | Rectangular |
Hardness | 200 BHN / HB |
Country of Origin | Made in India |
Type | Sheet ,Plate |
Thickness | 3 mm to 100 mm |
Material Grade | SAIL HARD, 200 BHN Steel Plate |
Brand | Tata |
Additional Information:
View Complete details
Minimum Order Quantity: 50 Kg
Product Brochure
Brand | Nippon, Essar, Raex |
Type | Sheet, Plate |
Usage/Application | Industrial |
Material | Wear Resistant 400 Bhn Steel Plate |
Shape | Rectangular |
Hardness | 400 BHN |
I Deal In | New Only |
Country of Origin | Made in India |
Size | THICKNESS: 2 to 130 mm WIDTH: Up to 3350 mm LENGTH: Up to 14630 mm |
Material Grade | HARD 400, 400 BHN, ABREX 400, ROCKSTAR 400, RAEX 400 |
Nufit Piping Solutions is a exporter & supplier of Abrasion Resistant Hard 500 BHN HBW Steel Plate available in various sizes.
The bendable, weldable and highly abrasion-resistant steel. Hard 500 is a bendable and weldable abrasion-resistant steel, with a nominal hardness of 500 BHN / HBW. Suitable for applications that demand higher wear resistance. Hard 500 increases payload and increases service life while maintaining good processability and toughness.
Dimension Range Hard 500 is available in thicknesses of 4.0 – 103 mm. Hardox 500 is available in widths up to 3350 mm and lengths up to 14630 mm
Additional Information:
View Complete details
Product Brochure
Boiler Type | Water Tube |
Size | 3/4 inch |
Finishing | Polished |
Material | Stainless Steel |
Usage/Application | Industrial Purpose |
Type | SA516 |
View Complete details
Minimum Order Quantity: 50 Kg
Product Brochure
Thickness | 4 mm to 150 mm |
Country of Origin | Made in India |
Material | Carbon Steel |
Usage/Application | Boiler, Pressure Vessel |
Steel Grade | ASTM A516 / ASME SA516 - Grade 55, 60, 65, 70 |
Brand | Nufit |
Boiler Type | Hot Water |
Nufit Piping Solutions is a Exporter & Supplier of Boiler Quality / Pressure Vessel Quality Steel Plate ASTM A516 / ASME SA516 Grade 70 available in various size.
A516 steel plate is the most popular pressure vessel quality steel plate. Though it comes in different grades, A516-70 is the most common. It is suitable for use in moderate and lower temperature applications and where notch toughness is important. It offers an excellent combination of strength, notch toughness, and weldability.
A516 is a high value pressure vessel quality steel plate that provides good notch toughness. It offers excellent weldability and can tolerate moderate to lower temperatures. One disadvantage is that it is not easily formed or machined.
There are four grades of this steel: A516 - 55, 60, 65, 70. 70 is the most widely used pressure vessel quality carbon steel plate. Tensile strength is one of the primary differences between grades. Grade 70 has a tensile strength between 485 – 625 MPa, which is the highest of all the grades.
Size: 4 mm to 150 mm
Additional Information:
View Complete details
Minimum Order Quantity: 100 Kg
Product Brochure
I Deal In | New Only |
Technique | Rolled |
Hardness | 400 BHN / HBW |
Country of Origin | Made in India |
Type | Sheet, Plate |
Brand | Rockstar 400, Rockhard 400, Abrex, Raex, Quard, etc |
Size | THICKNESS: 2 to 130 mm WIDTH: Up to 3350 mm LENGTH: Up to 14630 mm |
Material Grade | 400 BHN, ABREX 400, ROCKSTAR 400, RAEX 400 |
Material | Wear / Abrasion Resistant 400 BHN / HBW Steel Plate |
Shape | Rectangular |
Usage/Application | Industrial |
Thickness | 6-15 mm |
Nufit Piping Solutions is a exporter & supplier of Abrasion Resistant Hard 400 BHN Steel Plate available in various sizes.
400 BHN Steel is an abrasion-resistant steel with a nominal hardness of 400 HBW. It is a versatile wear-resistant steel. As a result of its high toughness, good bendability and weldability, this steel can be used in structures with moderate wear.
It is available as plate in thicknesses of 4.0 – 130 mm (5/32 - 5.12”), and as sheet in thicknesses of 2.0 - 8.0 mm (0.079 - 0.315”). The plate is available in widths up to 3350 mm (131.89”) and lengths up to 14630 mm (575.98”). The sheet is available in widths up to 1650 mm (64.96”) and lengths up to 16000 mm (629.92”).
Additional Information:
View Complete details
Minimum Order Quantity: 50 KG
Product Brochure
Yield Min Mpa | Min 30 ksi |
Country of Origin | Made in India |
Thickness | 3 mm to 100 mm |
Material Grade | ASTM A283 Grade C |
Brand | Nufit |
Usage/Application | Construction |
Standard | ASTM A283 |
Additional Information:
View Complete details
Product Brochure
Material | SS |
Usage / Application | Industrial |
Finishing | Polished |
Packaging Type | Box |
Country of Origin | Made in India |
Product Type | EN9 C55 |
View Complete details