NUFIT PIPING SOLUTIONS

Nufit Piping Solutions is manufacturer & exporter of Aluminium 7075 Sheet / Plate.

 

7075 aluminium alloy (AA7075) is an aluminium alloy with zinc as the primary alloying element. It has excellent mechanical properties and exhibits good ductility, high strength, toughness, and good resistance to fatigue. It is more susceptible to embrittlement than many other aluminium alloys because of microsegregation, but has significantly better corrosion resistance than the alloys from the 2000 series. It is one of the most commonly used aluminium alloys for highly stressed structural applications and has been extensively used in aircraft structural parts.

 

7075 aluminium alloy's composition roughly includes 5.6–6.1% zinc, 2.1–2.5% magnesium, 1.2–1.6% copper, and less than a half percent of silicon, iron, manganese, titanium, chromium, and other metals. It is produced in many tempers, some of which are 7075-0, 7075-T6, 7075-T651.

 

Size: 0.5 mm to 100 mm

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: TRANSPORT WORTHY

Nufit Piping Solutions is manufacturer & exporter of Aluminium 6061 Round Sheet / Plate available in various size.

 

Aluminium 6061 designation A96061 is a precipitation-hardened aluminium alloy, containing magnesium and silicon as its major alloying elements. Originally called "Alloy 61S", it was developed in 1935. It has good mechanical properties, exhibits good weldability, and is very commonly extruded (second in popularity only to 6063). It is one of the most common alloys of aluminium for general-purpose use.

 

It is commonly available in pre-tempered grades such as 6061-O (annealed), tempered grades such as 6061-T6 (solutionized and artificially aged) and 6061-T651 (solutionized, stress-relieved stretched and artificially aged).

 

Size: 0.5 mm to 100 mm

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: TRANSPORT WORTHY

Nufit Piping Solutions is manufacturer & exporter of Aluminium 6061 Round Pipe & Tube available in various size.

 

Aluminium 6061 designation A96061 is a precipitation-hardened aluminium alloy, containing magnesium and silicon as its major alloying elements. Originally called "Alloy 61S", it was developed in 1935. It has good mechanical properties, exhibits good weldability, and is very commonly extruded (second in popularity only to 6063). It is one of the most common alloys of aluminium for general-purpose use.

 

It is commonly available in pre-tempered grades such as 6061-O (annealed), tempered grades such as 6061-T6 (solutionized and artificially aged) and 6061-T651 (solutionized, stress-relieved stretched and artificially aged).

 

Size: 1/2" to 12"

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: TRANSPORT WORTHY

Nufit Piping Solutions is manufacturer & exporter of Aluminium 6063 Sheet / Plate.

 

AA 6063 is an aluminium alloy, with magnesium and silicon as the alloying elements. The standard controlling its composition is maintained by The Aluminum Association. It has generally good mechanical properties and is heat treatable and weldable. It is similar to the British aluminium alloy HE9.

 

6063 is the most common alloy used for aluminium extrusion. It allows complex shapes to be formed with very smooth surfaces fit for anodizing and so is popular for visible architectural applications such as window frames, door frames, roofs, and sign frames. Applications requiring higher strength typically use 6061 or 6082 instead.

 

Size: 0.5 mm to 100 mm

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: TRANSPORT WORTHY

Nufit Piping Solutions is manufacturer & exporter of Aluminium 6061 Flat Bar available in various size.

 

Aluminium 6061 designation A96061 is a precipitation-hardened aluminium alloy, containing magnesium and silicon as its major alloying elements. Originally called "Alloy 61S", it was developed in 1935. It has good mechanical properties, exhibits good weldability, and is very commonly extruded (second in popularity only to 6063). It is one of the most common alloys of aluminium for general-purpose use.

 

It is commonly available in pre-tempered grades such as 6061-O (annealed), tempered grades such as 6061-T6 (solutionized and artificially aged) and 6061-T651 (solutionized, stress-relieved stretched and artificially aged).

 

Size: 3/8" to 13" x 1/4" to 4"

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: TRANSPORT WORTHY

Nufit Piping Solutions is supplier & exporter of Aluminium 6101 Flat Bar, Square Bar available in various sizes.

Aluminium 6101 (UNS a96101) is an Aluminum Bar containing a heat treatable wrought alloy best suited for applications involving moderate strength and maximum electrical conductivity.

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: Transport Worthy

Nufit Piping Solutions is a Supplier & exporter of Aluminium 6082 Flat Bar & Square Bar available in various sizes.

Aluminium alloy 6082 is a medium strength alloy with excellent corrosion resistance. It has the highest strength of the 6000 series alloys. Alloy 6082 is known as a structural alloy. In plate form, Aluminium alloy 6082 is the alloy most commonly used for machining.

Additional Information:

• Delivery Time: Ready Stock

Nufit Piping Solutions supplies Aluminium Chequred Sheet in different design & size. The high strength-to-weight ratio and raised anti-skid patterns, make our flooring sheets ideal for use in a number of flooring allocations, especially for bus, truck and rail coaches, loading bays, kick plates, stair treads and catwalks.

The aluminium flooring sheets and plates are resistant to corrosion and denting and able to withstand severe conditions of abrasion.

Light, rust-free, hygienic and easy-to-clean, our sheets and plates are manufactured with state-of-the-art equipment and sophisticated process technology. Stringent quality control measures have made them a standard in the aluminium flooring market.

Additional Information:

• Delivery Time: Ready stock
• Packaging Details: transport worthy

NUFIT PIPING SOLUTIONS maintains a large inventory of Hindalco Make Aluminium Sheet, Plate, Coil, Flat, Profile, Chequered Plate available in various grade & size.

 

As one of India's largest producers of flat rolled products, Hindalco's aluminium sheet is produced from its own cast slabs or continuous cast coils, rolled down to customised thickness, gauge and tolerances. Their hot rolled & cold rolled plates are durable and deliver long lasting performance.

Grade: ASTM B209 1050, 1060, 1070, 1080, 1100, 1200, 3003, 3105, 8011, 5052, 5083, 5086, 5251, 6061, 6082, 6351, 7039, 7075

 

Temper: F, O, T6, H14, H16, H18

Size: Thickness: 0.3 mm to 200 mm, Width: 600 mm to 1550 mm, Length: 1000 mm to 7000 mm

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: Transport Worthy

Nufit Piping Solutions is manufacturer & exporter of Aluminium 7075 Round Bar / Rod available in various sizes.

 

7075 aluminium alloy (AA7075) is an aluminium alloy with zinc as the primary alloying element. It has excellent mechanical properties and exhibits good ductility, high strength, toughness, and good resistance to fatigue. It is more susceptible to embrittlement than many other aluminium alloys because of microsegregation, but has significantly better corrosion resistance than the alloys from the 2000 series. It is one of the most commonly used aluminium alloys for highly stressed structural applications and has been extensively used in aircraft structural parts.

 

7075 aluminium alloy's composition roughly includes 5.6–6.1% zinc, 2.1–2.5% magnesium, 1.2–1.6% copper, and less than a half percent of silicon, iron, manganese, titanium, chromium, and other metals. It is produced in many tempers, some of which are 7075-0, 7075-T6, 7075-T651.

 

Size: DIA 3 mm to DIA 300 mm

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: TRANSPORT WORTHY

Nufit Piping Solutions is manufacturer & exporter of Aluminium 6061 Round Bar / Rod available in various size.

 

Aluminium 6061 designation A96061 is a precipitation-hardened aluminium alloy, containing magnesium and silicon as its major alloying elements. Originally called "Alloy 61S", it was developed in 1935. It has good mechanical properties, exhibits good weldability, and is very commonly extruded (second in popularity only to 6063). It is one of the most common alloys of aluminium for general-purpose use.

 

It is commonly available in pre-tempered grades such as 6061-O (annealed), tempered grades such as 6061-T6 (solutionized and artificially aged) and 6061-T651 (solutionized, stress-relieved stretched and artificially aged).

 

Size: DIA 3 mm to DIA 300 mm

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: TRANSPORT WORTHY